Power Package

Every customer gets five documents. Most roofing companies hand over none of them.

A roof is covered up as it’s installed. The Power Package is the paper trail that proves what you actually bought.

A finished roof cannot be inspected

The moment the last shingle goes down, everything that determines how long the roof lasts is out of sight.

A homeowner standing in the driveway after a replacement cannot verify the underlayment, cannot see whether the flashings were replaced or reused, cannot confirm which products were installed, and has no way of knowing whether the manufacturer warranty was ever registered. Those are the four things that decide whether the roof performs for twenty-five years or fails in eight, and all four are unverifiable by the time the crew leaves.

The standard practice in this industry is to hand over an invoice and drive away. The Power Package is five documents delivered at project completion that make the work checkable after the fact. It is not a perk and we would rather it not be read as one — it exists so that a homeowner can confirm what they paid for, years later, without taking anyone's word for it, including ours.

What’s inside

Five documents. What each one is, and why it matters after the job is done.

1. Certificate of Completion

A formal, dated acknowledgment that the project is finished. It belongs in your property records, it is the document a buyer's agent asks for at resale, and it is the dated anchor the warranty period runs from. Without it, the start date of your coverage is a matter of memory.

2. Registered manufacturer system warranty

The system warranty from the manufacturer you selected, registered in your name, with the registration confirmation included. Atrium is a certified installer for Owens Corning, GAF, Atlas, and Malarkey, so the document you receive matches the system that went on your roof. Atrium holds Owens Corning Platinum Preferred, the top tier of the Owens Corning contractor network, which makes the enhanced Owens Corning system warranty available on our installs. We also hold GAF Certified Plus, which makes the GAF Silver Pledge available. These system warranties cover material and, at these tiers, workmanship, and they are registered with the manufacturer in your name. A system warranty does not attach automatically because a certified contractor did the work. It has to be registered, most homeowners never receive proof that it was, and an unregistered warranty is worth nothing at the moment it is needed.

3. Impact-resistant certification

The document you submit to your insurance carrier to claim the wind-and-hail premium discount on a UL 2218 Class 4 roof. State Farm publishes a discount of up to 30 percent on that portion of the premium; the amount varies by carrier and policy, so check yours. It is the specific paper carriers ask for, and homeowners frequently do not know it exists. See hail damage for how Class 4 performs.

4. Paid invoice

A clean record showing the work was completed and paid in full. It matters at resale, it is what an insurance carrier wants during claim reconciliation to release recoverable depreciation, and it is the simplest proof you have of what the project cost.

5. Material invoice

The supplier's own invoice, showing exactly what was purchased, in what quantity, from which local supplier. This is the one that matters most. It is the only document that proves the materials specified in the proposal are the materials that actually went on your roof. Substitution is invisible once the roof is finished. Handing over the supplier invoice removes the possibility — and almost no contractor does it, because it also shows what they paid.

Why this matters more in roofing than anywhere else

Most large purchases leave evidence behind. A roof does not.

A roof is assembled in layers, and each layer is covered by the next as the work proceeds. Decking condition is hidden by underlayment, underlayment by shingles, flashing detail by the courses that lap over it. By the time the project is complete, every element that determines service life — decking, underlayment, flashing, ventilation — is permanently out of sight.

Compare that to anything else of similar cost. A car carries a VIN and a service history that follows it between owners. A kitchen renovation leaves permits, inspections, and appliances with model numbers on them. A roof leaves a homeowner judging thirty thousand dollars of work by how it looks from the street, which is the one measure that reveals nothing about how it was built.

The Power Package is an attempt to give roofing the paper trail other purchases already have. It does not make the work better on its own. It makes the work verifiable, which over time tends to have the same effect.

What it costs

Nothing.

The Power Package is included with every replacement. It is not an upgrade, not an add-on, and not attached to a premium tier, and you do not have to ask for it. The documents are a byproduct of doing the job properly; withholding them would take more effort than sending them.

If you have already had a roof replaced by someone else and want to know which of these five documents you should have received, ask us and we will tell you. There is nothing in it for us, and it is a fifteen-minute conversation that occasionally saves a homeowner a warranty claim or an insurance discount they did not know they were entitled to.

When you get it

Four steps, ending with an email you keep.

  1. 1
    During the project

    We photograph and document as the assembly goes on, layer by layer, because after the next layer nothing underneath can be verified.

  2. 2
    At completion

    The certificate of completion is issued and dated. That date is what the warranty period runs from.

  3. 3
    Registration

    The system warranty is registered with the manufacturer in your name and we obtain the confirmation rather than assuming it went through.

  4. 4
    Delivery

    The full package arrives by email with all five documents attached, typically within a few days of final completion.

The documents are yours to keep and to forward — to an insurance carrier applying a premium discount, to a buyer's agent during a sale, or to a future roofer who needs to know what is already on the house.

Power Package FAQs

It is a set of five documents delivered at the end of every roof replacement: the certificate of completion, the registered manufacturer system warranty in your name for the manufacturer you selected, the impact-resistant certification for your insurance carrier, the paid invoice, and the supplier's material invoice. Together they let you verify what was installed on your roof after the roof is covered up and no longer inspectable.

No. It is included with every replacement. It is not an upgrade, not a package tier, and not something priced into a premium option. The documents already exist as part of doing the work correctly; the only difference is that we hand them to you.

No. It is delivered by email at project completion without a request. If it has not arrived within a few days of final completion, call us and we will send it again.

It is the document your insurance carrier asks for when applying a wind-and-hail premium discount to a UL 2218 Class 4 roof. Without it, most carriers will not apply the discount, and many homeowners never learn the document exists. You submit it to your carrier or agent once, and the discount applies going forward.

It varies by carrier, by policy form, and by where you live. State Farm publishes a discount of up to 30 percent on the wind and hail portion of the premium for qualifying impact-resistant roofs, which is a useful reference point rather than a guarantee. Ask your own carrier in writing what they apply and what documentation they require.

Because it is the only document that proves the materials on the proposal are the materials that went on the roof. Once the roof is finished, product substitution is invisible. Sharing the supplier invoice also exposes our material cost, which is why most contractors will not do it — but a contractor unwilling to show it is asking to be trusted on the one thing a homeowner can never check later.

We keep copies. Call or email and we will resend the full set. Manufacturer warranty registrations also live with the manufacturer under your name, so that record exists independently of both of us.

The full five-document package is tied to replacements, because several of the documents only apply to a complete system installation. Repairs receive documentation appropriate to the scope: photographs of the condition and the completed work, a written description of what was done, and a paid invoice.

Yes. The documents are yours to keep and to forward. Buyers and their agents generally treat a dated certificate of completion and a registered manufacturer warranty as meaningful, and the enhanced warranty may be transferable to a subsequent owner, subject to the manufacturer's terms, transfer window, and any transfer fee.

Contact the manufacturer directly with your installation date and the contractor's name. Enhanced warranties generally have to be registered within a limited window after installation, so the answer depends on how long ago the work was done. If you are unsure what you have, send us what documentation you do have and we will tell you what it is.
Ask what you’ll be handed when the job is done.

Ask us, and ask everyone else you are considering. The answer sorts contractors quickly.